Nokia 9000i Service Manual page 221

After Sales
Technical Documentation
Flash Downloading
GP1 (PDA) module Flash image can be downloaded two ways. The most
common way is to use RS232 cable DLR–1, and a modified Power
Adapter module. This Flash downloading can be done either one
communicator at a time or simultaneously for eight communicators.
The JTAG method is required if the uppermost flash device in the memory
map (D163, schematic reference) is changed to a blank flash device. In
this method a special adapter card is connected to the dummy test
battery.
GE8 (CMT) module Flash image is downloaded using Flash Programming
Set FPS–3. The dummy test battery is needed in addition to ordinary
FPS–3 hardware and software.
Flash image download setups for both modules is illustrated overleaf.
Amendment 1 04/97
RAE/RAK–1N
Service Software
Page 7– 63