Nokia 9000i Service Manual page 194

RAE/RAK–1N
Service Software
3.6.1 – Read A/D Converters
After this selection new window is shown:
No value is shown when selected. When correspondent messages are
received, the A/D converter values (10 bits decimal numbers) are
displayed and read again. The exit is made with <Esc>.
3.6.3 – LCD Test Display
The LCD display is changed by using the number or <Enter> key. Two
different test displays can be selected. When Logic Controls menu is
selected, the display is controlled to the state shown in the menu.
– In test display 1 all indicators are displayed and the display is filled
with chessboard letters.
– In test display 2 none of the indicators are displayed and the
display is filled with inverse chessboard letters.
Page 7– 36
After Sales
Technical Documentation
Amendment 1 04/97