Nokia 9000i Service Manual page 198

RAE/RAK–1N
Service Software
4.1.1 – Lock ID
When this function is activated, the code can be edited; note that code is
saved to the ME memory together with other user settings and values.
Only digits are accepted for Security lock.
4.1.2 – Master Code
The master code cannot be edited.
4.1.3 – Wake Up Message
Examine the old Wakeup Message (read from the phone) or enter the new
one.
4.1.4 – No Service Power
OFF: "No Service Power Save" is not used.
ON: "No Service Power" is used.
4.2 – Product Profile Settings
When Product Profile Settings selection is activated the Product Profile
information is read from EEPROM. If the information is not received within
2 seconds an error message is shown and the ME Memory Functions
menu is displayed. Otherwise the Product Profile Settings menu is
displayed, where the user can select features.
When <Esc> key is used in this menu, the program will ask if the values
are to be saved to the EEPROM or not. If <Y> key is used, values are
saved to the EEPROM before the ME Memory Functions menu is
displayed. If <N> key is used the ME Memory Functions menu is
displayed without the save function being used. If <Esc> key is used the
Product Profile Setting menu is shown and the values can be changed.
Page 7– 40
After Sales
Technical Documentation
Amendment 1 04/97