RAE/RAK–1N
CARK60 Installation Guide
Unpacking
Carefully unpack the equipment and ensure that the following items are
present.
Charging Holder
Junction Box
Mounting Plate
Swivel Mounting Plate
Flat Mouning Kit
Hands–Free Microphone
Hands–Free Speaker
Power Cable
Figure 1. CARK60 Kit and options
Component Parts
Charging Holder MBR–1
The Charging Holder unit offers your Communicator an external antenna
connection, hands–free function, and firm attachment to the vehicle. The
installation of the Holder can be done in two different ways: either 1) using
Swivel (adjustable angles) or 2) using Flat Mounting Kit (fixed position).
Mounting Plate MKE–1, Flat Mounting Kit MKK–1 and Swivel MKR–1
The Mounting Plate is used to mount the Hands–Free Junction Box.
Screw the Mounting Plate to the appropriate place and slide on to the
Junction Box.
Page 6
MBR–1
(to be mounted with MKE–1) HFJ–3
(w/12 screws, 4 nuts, 4 washers) MKE–1
(incl. mounting plates & screws) MKR–1
(incl. mounting plates & screws) MKK–1
HFM–10
(w/2 screws) HFS–6
(w/2 fused connectors & wire ends) PCH–4
Communicator
not included
MOBILE
ANTENNA
(optional)
DLR–1
(optional)
HSU–1
(optional)
Technical Documentation
MBR–1
MKE–1
MKR–1
HFJ–3
PCH–4
HFM–10
HFS–6
After Sales
Original, 08/96