Nokia 9000i Service Manual page 190

RAE/RAK–1N
Service Software
If no measurement result is received when <Esc> key is used, the
information message is shown. The user can remove the information
message with <Y>, <N> or <Esc> key. The measurement will be
terminated by using <Y> key. The measurement will continue if <N> or
<Esc> key is used.
When at least one measurement is completed and <Esc> key is used, the
user must answer the values saving question. If <Esc> key is used, the
measurement is continued.
3.2.8 – Battery Voltage Adjustment
This function needs 6 V battery voltage from external power supply. When
the function is activated the next window will be shown.
The operation is the same as in Charge Voltage calibration.
Page 7– 32
After Sales
Technical Documentation
Amendment 1 04/97