RAE/RAK–1N
Service Software
The next tuning window will be activated automatically after value
selection. The power is presented in GSM values (5...15). The base GSM
power (5) is selected automatically when the function is started. The test
value is always the same when the function is started for the first time.
The test value is not saved to the EEPROM and can be changed during
tuning as other power coefficients and the program remembers its value
when tuning function is activated later again.
If a SW version is not received, spaces are shown in that version
number's place. The function is closed with <Esc> key.
Page 7– 44
After Sales
Technical Documentation
Amendment 1 04/97