Nokia 9000i Service Manual page 185

After Sales
Technical Documentation
Tune Amplitude Difference
When this selection is made the user can increase or decrease the
amplitude difference within 0.1 dB steps. The current amplitude difference
is shown on the tuning window with numbers and a bar figure.
Tune Phase Difference:
When this selection is made the user can increase or decrease the phase
difference within 0.5 steps. The current phase difference is shown on the
tuning window with numbers and bar figure.
After each value change the new values are sent to the phone.
The following is requested when TX I / Q tuning function is ended:
– Write values to EEPROM (y/n)
Amendment 1 04/97
RAE/RAK–1N
Service Software
Page 7– 27