Engine Coolant - BOMBARDIER 650 Operator's Manual

V04C20Y
TRAXTER CVT — RH SIDE OF ENGINE
1. Dipstick
1
V01C02Y
TRAXTER 5 SPEED — LH SIDE OF ENGINE
1. Dipstick
2. Filler cap
With vehicle on a level surface and
engine cold, not running, check the oil
level as follows:
1. Remove the dipstick and wipe
clean.
2. Reinstall dipstick.
must be insert properly and com-
pletely.
3. Remove the dipstick again and
check oil level. It should be near
or equal with the upper mark.
______________________
92
1
2
The dipstick
3
V00C01Y
TYPICAL
1. Full
2. Add
3. Operating range
To add oil, remove the dipstick (Traxter
CVT) or unscrew filler cap (Traxter 5
SPEED). Add a small amount of oil and
recheck oil level. Repeat until oil level
reaches the dipstick's upper mark. Do
not overfill.
NOTE:
Use a funnel to avoid spillage.
Properly reinstall the dipstick and/or
tighten filler cap then reinstall seat.

Engine Coolant

Recommended Coolant
Always use ethylene-glycol antifreeze
containing corrosion inhibitors specifi-
cally for internal combustion aluminum
engines.
Cooling system
with Bombardier premixed coolant
(P/N 219 700 362) or with distilled
water and antifreeze solution (50%
water, 50% antifreeze).
Coolant Level
WARNING
Check coolant level with engine
cold. Never add coolant in cool-
ing system when engine is hot.
Remove seat.
1
2
must be filled