Table of Contents
Advertisement
WARNING
Never run engine in an enclosed
area. Never perform this opera-
tion immediately after the engine
has been run because exhaust sys-
tem is very hot. Make sure that
there are no combustible materi-
als in the area. Wear eye protec-
tion and gloves. Never stand be-
hind the vehicle while purging ex-
haust system. Respect all applica-
ble laws and regulations.
Select a well-ventilated area and make
sure the muffler is cool.
Place transmission on PARK position.
Remove the cleanout plug from muf-
fler.
1
V04C0DY
TYPICAL — TRAXTER CVT
1. Clean-out plug
2. Muffler
2
_____________________
V01C05Y
TYPICAL — TRAXTER 5 SPEED
1. Clean-out plug
2. Muffler
Block the end of muffler with a shop
rag and start engine.
Momentarily increase engine RPM
several times to purge accumulated
carbon out of the muffler.
Stop engine and allow muffler to cool.
Reinstall the cleanout plug.
Radiator
Periodically check the radiator area
and the air ducts for cleanliness. En-
sure air ducts are unobstructed to
allow air flow going to the radiator.
NOTE:
On XL models , there are not
air ducts.
All Models except XL
An access hole is available to inspect
the radiator condition and to give ac-
cess for cleaning.
Remove seat.
Pull on the circumference of the ac-
cess plug and remove plug.
1 2
117
Hide quick links:
Advertisement
Table of Contents
