BOMBARDIER 650 Operator's Manual page 139

VEHICLE MODEL
LIQUIDS
Oil type
(engine and transmission)
Coolant
Type
Fuel
Octane
Differential Front and rear
Hydraulic brake
CAPACITIES
Fuel tank
Engine/transmission oil
Coolant
Front
Differential
Rear
ampere
A
Ah ampere hour
cc
cubic centimeters
cu. in. cubic inches
hp horsepower
Because of our ongoing commitment to product quality and innovation, Bom-
bardier reserves the right, at any time, to make changes in design and spec-
ifications and/or to make additions to, or improvements in its products without
imposing any obligation upon itself to install them on its products previously man-
ufactured.
500
SAE 10W40, 4-stroke mineral-based. API
classification SG, SH or SJ or Bombardier
synthetic oil. Refer to OIL VISCOSITY
CHART for other grade
Ethylene-glycol/water mix (50% coolant, 50%
distilled water). Use Bombardier premixed
coolant or a coolant specially designed
for aluminum engines.
Regular unleaded gasoline
87 (R + M)/2 or higher
Synthetic polyester oil 75W90 (API GL-5)
Brake fluid, DOT 4
22 L (5.8 U.S. gal) including
an approximate reserve of
4 L (1.1 U.S. gal).
Oil change with filter: 2.5 L (2.65 U.S. quarts).
Total: 3 L (3.17 U.S. quarts)
2.5 L (2.65 U.S. quarts)
610 mL (21 U.S. oz)
250 mL (8.5 U.S. oz)
kW kilowatt
RPM revolution per minute
Volt volt
W watt
_____________________
Traxter CVT
650 650 XT
139