To remove fuse from holder, remove
the fuse holder cover then pull fuse
out. Check if filament is melted.
A15E0KY
TYPICAL
1. Fuse
2. Check if melted
Bulb Replacement
WARNING
Always turn the ignition switch
OFF before replacing a defective
bulb.
Always check light operation after re-
placement.
Headlamps
CAUTION:
Never touch glass por-
tion of an halogen bulb with bare
fingers, it shortens its operating life.
If glass is touched, clean it with iso-
propyl alcohol which will not leave
a film on the bulb.
Unplug connector from headlamp.
_____________________
122
1
2
V04G02Y
Rotate the bulb socket counterclock-
wise then remove headlamp.
V04G03Y
1. Unlock
2. Lock
Properly reinstall removed parts in the
reverse order of their removal.
Adjust beam aiming as follows:
Turn knobs to adjust beam height and
side orientation to your convenience.
Adjust both headlamps evenly.
1
2