Fuses; Winch (If So Equipped); Winch Control Switch (If So Equipped); Fairlead (If So Equipped) - BOMBARDIER 650 Operator's Manual

An auxiliary supply is available to
connect additional accessories. Two
wires are hidden in the wiring harness
at the rear of vehicle. See an autho-
rized Bombardier ATV dealer for more
details.

26) Fuses

The electrical system is protected with
fuses. Refer to MAINTENANCE for
details.

27) Winch (if so equipped)

Located behind front skid plate.
V01A1OY
1. Winch
2. Front skid plate
28) Winch Control Switch
(if so equipped)
Located on the LH side of the handle-
bar, near multi-function switch.
2
V04A15Y
1. In
2. Out
To take out wire rope from winch,
press the left side of switch.
______________________
88
1 2
To get wire rope into the winch, press
the right side of switch.
Refer to ATV Winch Operator's Man-
ual for more informations concerning
the instructions for use the winch
safely.
29) Fairlead
(if so equipped)
Located on the front skid plate.
V01A1OZ
1. Front skid plate
2. Fairlead
The fairlead is used to prevent the
damages to the vehicle and guide the
wire rope into the winch.

30) Release lever

XL Models
Located under cargo box on the right
side of seat and it allows the dumping
of cargo box.
To dump cargo box, move release
1
lever toward the right side.
2 1