BOMBARDIER 650 Operator's Manual page 130

Hitch/Trailer Ball Condition
Check tightness of fasteners and tight-
ness/condition of trailer ball. Properly
retighten as necessary and replace ball
if worn.
Fasteners
Check fastener condition and tight-
ness on the vehicle. Retighten as
required.
Seat Latch
Remove seat and check the locking
mechanism and its pin for wear. See
an authorized Bombardier ATV dealer
for parts replacement if damaged.
Front Storage Compartment
Latch
Check latch condition. See an autho-
rized Bombardier ATV dealer for parts
replacement if damaged.
Vehicle Cleaning and Protection
Never use a high pressure washer to
clean the vehicle. USE LOW PRES-
SURE ONLY (like a garden hose). High
pressure can cause electrical or me-
chanical damages.
Painted parts which are damaged
should be properly repainted to pre-
vent rust.
When required, wash the body with
hot water and soap (only use mild de-
tergent). Apply nonabrasive wax.
CAUTION:
Never clean plastic
parts with strong detergent, de-
greasing agent, paint thinner, ace-
tone, etc.
Winch
XT Models
No lubrication is required for the life of
the winch.
_____________________
130
Check battery cables at 90 day inter-
vals to be certain that they are clean
and tight at all connections.
Inspect the wire rope before and af-
ter each winching operation. Replace
winch rope when damage.
For more details, see ATV Winch Op-
erator's Manual.
NOTE:
This manual should be kept
in the tool box and remain with the
vehicle at all time.
Cargo Box
XL Models
Check release lever and its mecha-
nism for bend, cracks or other dam-
ages.
Lift up cargo box and check latches
mechanism and pins for wear.
Check gate latches condition.
See an authorized Bombardier ATV
dealer for parts replacement if dam-
aged.