Ricoh D025 Service Manual page 1008

System Service Mode
9912 [Target Angle] Ferrite Roller Paper Size Adjustment DFU
001 A3/DLT
002 B4
003 A4/LT
004 B5
005 A5/HLT
006 B6
007 A6
9921 Page Correction Setting
[Repeat Print Temp.Correction]
9965
These SPs are used for Preventing the fusing temperature overheating due to
a multiple printing job.
JOB Interval: Plain
001 Specifies the job interval time in plain paper mode. The machine does not enter
the temperature correction mode for preventing the overheating for the time
specified with this SP.
JOB Interval: M-Thick
002 Specifies the job interval time in middle thick paper mode. The machine does
not enter the temperature correction mode for preventing the overheating for
the time specified with this SP.
D023/D025
*ENG [0 to 960 / 323 / 1 PULSE/step]
*ENG
[0 to 960 / 381 / 1 PULSE/step]
*ENG [0 to 960 / 400 / 1 PULSE/step]
*ENG [0 to 960 / 498 / 1 PULSE/step]
*ENG [0 to 960 / 525 / 1 PULSE/step]
*ENG
[0 to 960 / 525 / 1 PULSE/step]
*ENG
[0 to 960 / 525 / 1 PULSE/step]
Not used in this machine.
*CTL
[0 to 9999999/ 0 / 1]
*ENG [0 to 120 / 30 / 1 sec/step]
*ENG [0 to 120 / 30 / 1 sec/step]
8-412 SM Appendix