Ricoh D025 Service Manual page 710

System Service Mode
[Thick 3: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2655
plate at the paper leading edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side
002 Separation DC: 1st Page
003 Paper Transfer: 2nd Side
004 Separation DC: 2nd Page
[Thick 3: Trailing Edge Correction] Thick 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
2656
edge in each mode. SP2651 and SP2652 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2657.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
003 Separation DC: 1st Page
004 Separation DC: 2st Page
D023/D025
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
8-114 SM Appendix