Ricoh D025 Service Manual page 1439

Bit Switches
retransmissions in a G3
memory transmission
Communication Switch 04 - Not used (do not change the settings)
Communication Switch 05 - Not used (do not change the settings)
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
Communication Switch 09 [SP No. 1-104-010]
No FUNCTION
0-7 IP-Fax dial interval setting
Communication Switch 0A [SP No. 1-104-011]
No FUNCTION
Point of resumption of memory
transmission upon redialing
0
0: From the error page
1: From page 1
1-7 Not used
Communication Switch 0B [SP No. 1-104-012]
No FUNCTION
D393
This setting is not used if ECM is switched on.
Default setting - 03(H)
COMMENTS
Adjusts the interval of the I-fax dialing.
The interval of I-fax dialing is calculated by
following formula.
[Interval time = specified value with this switch x
0.2 msec]
COMMENTS
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page, using
normal memory transmission.
Do not change the settings.
COMMENTS
98 SM