Ricoh D025 Service Manual page 1443

Bit Switches
0: Disabled
1: Enabled
SUB reception
1 0: Disabled
1: Enabled
PWD reception
2 0: Disabled
1: Enabled
3-6 Not used
Action when there is no box
with an F-code that matches
the received SUB code
7
0: Disconnect the line
1: Receive the message
(using normal reception mode)
Communication Switch 18 [SP No. 1-104-025]
No FUNCTION
0-4 Not used
IP-Fax dial-in routing selection
5 0: Off
1: On
6-7 Not used
Communication Switch 19 - Not used (do not change the settings)
Communication Switch 1A - Not used (do not change the settings)
Communication Switch 1B [SP No. 1-104-028]
D393
machine using the SEP (Selective Polling) signal
is disabled.
0: Confidential reception to another maker's
machine using the SUB (Sub-address) signal is
disabled.
0: Disables features that require PWD (Password)
signal reception.
Do not change the factory settings.
Change this setting when the customer requires.
COMMENTS
Do not change the factory settings.
1: Transfers receiving data to each IP-Fax dial-in
number.
IP-Fax dial-in number is 4 digit-number.
Do not change the factory settings.
102 SM