Ricoh D025 Service Manual page 1418

30 min1
Bit 5: 1, Bit 4: 0
1 hour
Bit 5: 1, Bit 4: 1
24 hours
6-7 Not used
System Switch 16 [SP No. 1-101-023]
No FUNCTION
Parallel Broadcasting
0 0: Disabled
1: Enabled
Priority setting for the G3 line.
1 0: PSTN-1 > PSTN-2 or 3
1: PSTN-2 or 3 > PSTN-1
2-7 Not used
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
System Switch 19 [SP No. 1-101-026]
No FUNCTION
0-5 Not used
Extended scanner page
memory after memory option
6
is installed
0: Disabled
SM
Do not change
COMMENTS
1: The machine sends messages simultaneously
using all available ports during broadcasting.
This function allows the user to select the default
G3 line type. The optional SG3 unit(s) are required
to use the PSTN-2 or 3 setting.
Do not change these settings.
COMMENTS
Do not change the settings.
0: After installing the memory expansion option, the
scanner page memory is extended to 4 MB from 2
MB.
1: If this bit is set to 1 after installing the memory
77
Bit Switches
D393