Ricoh D025 Service Manual page 1366

Code Meaning
Non-standard post
0-14 message response code
received
The other terminal is not
0-15 capable of specific
functions.
CFR or FTT not detected
after modem training in
0-16
confidential or transfer
mode
SM
Suggested Cause/Action
Try adjusting the tx level and/or cable
equalizer settings.
The other end may have a defective
modem/FCU; try sending to another machine.
Check for line problems and noise.
Cross reference
Tx level - NCU Parameter 01 (PSTN)
Cable equalizer - G3 Switch 07 (PSTN)
Dedicated Tx parameters in Service Program
Mode
Incompatible or defective remote terminal; try
sending to another machine.
Noisy line: resend.
Try adjusting the tx level and/or cable
equalizer settings.
Replace the FCU.
Cross reference
See error code 0-08.
The other terminal is not capable of accepting the
following functions, or the other terminal's memory
is full.
Confidential rx
Transfer function
SEP/SUB/PWD/SID
Check the line connection.
Replace the FCU.
Try adjusting the tx level and/or cable
equalizer settings.
The other end may have disconnected, or it
may be defective; try calling another machine.
If the rx signal level is too low, there may be a
line problem.
25
Error Codes
D393