Ifax Specifications - Ricoh D025 Service Manual

5.2 IFAX SPECIFICATIONS

Local area network
Connectivity: Ethernet 100base-Tx/10base-T
IEEE802.11a/g, g (wireless LAN), 1000 Base-T
Main scan: 400 dpi, 200 dpi
Sub scan: 400 dpi, 200 dpi, 100 dpi
Resolution:
1 s (through a LAN to the server)
Condition: ITU-T #1 test document (Selerexe Letter)
MTF correction: OFF
Transmission TTI: None
Resolution: 200 x 100 dpi
Time:
Communication speed: 10 Mbps
Correspondent device: E-mail server
Line conditions: No terminal access
Maximum message width is A4/LT.
Document Size:
Single/multi-part
E-mail File
MIME conversion
Format:
Image: TIFF-F (MH, MR, MMR)
Transmission:
SMTP, TCP/IP
Protocol:
Reception:
POP3, SMTP, IMAP4, TCP/IP
100 Mbps(100base-Tx)
Data Rate:
10 Mbps (10base-T)
SM
To use 400 dpi, IFAX SW01 Bit 4 must be set to "1".
To use B4 and A3 width, IFAX SW00 Bit 1 (B4) and/or Bit 2
(A3) must be set to "1".
169
IFAX Specifications
D393