Common Procedures
1.1.2 FRONT COVER
Preparation
Disconnect the finisher.
Remove the finisher from the side of the machine.
1.
Open the stapler door [A].
2.
Remove the front cover [B] ( x2)
Release tab [C] after removing the screws, then raise the bottom of the front cover to
remove it.
1.1.3 REAR COVER
Preparation
Disconnect the finisher.
Remove the finisher from the side of the machine.
1.
Remove the rear cover [A] ( x2)
Release tab [B] after removing the screws, then raise the bottom of the rear cover to
remove it.
D372
2
SM