Cleaning The Spark Arrester - E-TON Yukon II Service Manual

CLEANING THE SPARK ARRESTER

1
2
c
a
CLEANING THE SPARK ARRESTER
1. Clean:
• spark arrester
3
WARNING
• Select a well-ventilated area free of com-
bustible materials.
• Always let the exhaust system cool
before performing this operation.
• Do not start the engine when removing
(Only U.S.)
the tailpipe from muffler.
a. Remove the bolt
b
Remove the screw
b. Remove the spark arrester
the muffler.
Remove the back cover of muffler
spark arrester
c. Tap the tailpipe lightly with a soft-face hammer or
suitable tool, then use a wire brush to remove any
carbon deposits from the spark arrester portion of
the tailpipe and the inner contact surfaces of the
muffler.
d. Insert the spark arrester and the back cover of
muffler into the muffler, then align the screw holes.
e. Insert the screw and tighten it.
3 - 18
CHK
ADJ
l
1 2
and nut .
a
. (Only U.S.)
3 by pulling it out of
c
. (Only U.S.)
Screw
5 Nm (0.5 m · kg, 3.6 ft · lb)
b
and the