Adjusting The Speed Limiter - E-TON Yukon II Service Manual

ADJUSTING THE THROTTLE LEVER FREE PLAY/
2
1

ADJUSTING THE SPEED LIMITER

3
a
3 - 10
2. Adjust:
• throttle lever free play
a. Pull back the adjuster cover
b. Loosen the locknut
side.
3
c. Turn the adjuster
rect free play is obtained.
Turning in Free play is increased.
Turning out Free play is decreased.
2
d. Tighten the locknut
e. Push in the adjuster cover
WARNING
After adjusting the free play, turn the han-
dlebar to the right and left to make sure
that the engine idling speed does not
increase.
TIP
Disconnect the throttle cable at the upper end.
Lubricate the cable with commercially lubricant
to prevent premature wear.
ADJUSTING THE SPEED LIMITER
The speed limiter keeps the carburetor throttle
from becoming fully-opened even when the
throttle lever is applied to the maximum posi-
tion. Screwing in the adjuster stops the engine
speed from increasing.
1. Measure:
• speed limiter length
Out of specification → Adjust.
Speed limiter length
Less than 11.0mm (0.43 in)
CHK
ADJ
1
.
2
on the carburetor
in or out until the cor-
.
1
.
1