Cleaning The Spark Arrester - E-TON Viper 150 Owner's Manual

Cleaning the spark arrester

Be sure the exhaust pipe and muffler are cool be-
fore cleaning the spark arrester.
1. Remove the screw and nut.
2. Remove the spark arrester buy pulling it out
of muffler.
3. Tap the spark arrester lightly, and then use
a wire brush to remove any carbon deposits .
4. Insert the spark arrester into the muffler and
align the screw holes.
5. Install the screw and nut, and then tighten.
8
1. Spark arrester
2. Screw
3. Nut
2
1
3
Cleaning the spark arrester (for USA)
Be sure the exhaust pipe and muffler are cool be-
fore cleaning the spark arrester.
1. Remove the screw.
1
1. Screw
2. Back cover of muffler
3. Spark arrester
2. Remove the back cover of muffler.
3. Remove the spark arrester by pulling it out
of the muffler.
4. Tap the spark arrester lightly, and then use
a wire brush to remove any carbon deposits.
5. Insert the spark arrester and the back cover
of muffler into the muffler, then align the screw
holes.
6. Insert the screw and tighten it.
8-17
3
2