Adjusting The Shock Absorbers; Checking The Tires - E-TON Yukon II Service Manual

1
a
2
b
a
1
b
2

ADJUSTING THE SHOCK ABSORBERS/

CHECKING THE TIRES

1
2 3 4 5
1
2 3
4 5
3 - 28
ADJUSTING THE SHOCK ABSORBERS
WARNING
Always adjust the spring preload of both
front shock absorbers to the same setting.
Uneven adjustment can result in poor han-
dling and loss of stability.
1. Adjust:
• spring preload
a. Turn the adjusting ring
b
with the spanner wrench
Spring preload is increased
a
Direction
(suspension is harder).
Spring preload is decrease
b
Direction
(suspension is softer).
Standard position: Front-1, Rear-1
Minimum position: 1
Maximum position: 5
Front shock absorbers
Rear shock absorbers
CHECKING THE TIRES
WARNING
This model is equipped with low pressure
tires. It is important that they be inflated
correctly and maintained at the proper
pressures.
• TIRE CHARACTERISTICS
1) Tire characteristics influence the han-
dling of ATVs. The tires listed below
have been approved by E-TON POWER TECH
Co., Ltd. for this model. If other tire com-
binations are used, they can adversely
affect your machine's handling charac-
teristics and are therefore not recom-
mended.
Manufacturer
Front MAXXIS
Rear MAXXIS
CHK
ADJ
1 a
in direction or
2
.
Size Type
x
AT21
C9207
7-10
AT22 x
C9209
10-10