Checking The Spark Plug - E-TON Yukon II Service Manual

1
2
ADJUSTING THE SPEED LIMITER/

CHECKING THE SPARK PLUG

1
2
3 - 11
2. Adjust:
• speed limiter length
a. Loosen the locknut 1
b. Turn the adjuster 2
fied speed limiter length is obtained.
Speed limiter length is
Turning in
decreased.
Speed limiter length is
Turning out
increased.
c. Tighten the locknut.
WARNING
• Particularly for a beginner rider, the
speed limiter should be screwed in com-
pletely. Screw it out little by little as their
riding technique improves. Never remove
the speed limiter for a beginning rider.
• For proper throttle lever operation do not
turn out the adjuster more than 11.0 mm
(0.43 in). Also, always adjust the throttle
lever free play to 1.0~3.0 mm (0.04~0.12 in).
CHECKING THE SPARK PLUG
1. Remove:
• spark plug
2. Check:
• spark plug type
Incorrect → Change.
Standard spark plug
C7HSA/NGK
3. Check:
• electrode 1
Wear/damage → Replace.
• insulator 2
Abnormal color → Replace.
Normal color is a medium-to-light tan color.
TIP
Before installing a spork plug, clean the gasket
surface and plug surface.
CHK
ADJ
.
in or out until the speci-