Racks, Seat, Fenders And Fuel Tank; Racks, Seat And Front Panel - E-TON Yukon II Service Manual

RACKS, SEAT, FENDERS AND FUEL TANK

SEAT, FENDERS AND FUEL TANK
RACKS,

RACKS, SEAT AND FRONT PANEL

1
25 Nm (2.5 m kg, 18.1 ft
•
Order
Removing the
panel
1 Front rack
2 Rear rack
3 Seat
4 Front panel
5 Fuel tank breather hose
6 Front plate of handlebar cover
7 Handlebar cover
6
4
Ib)
•
Job/Part
racks,
seat and front
3 - 3
7 5
3
25 Nm (2.5 m
Q'ty Remarks
Remove the parts in the order listed.
1
1
1
TIP
Pull back the seat lock lever, than pull up
on the rear of the seat.
1
1
TIP
When installing the handlebar cover,
pass the fuel tank breather hose through
the hole in the handlebar cover.
1
1
Disconnect the meter lead and the main
switch lead.
For installation, reverse the removal pro-
cedure.
CHK
ADJ
2
kg, 18.1 ft Ib)
• •