Checking The Starter Wheel Gear - E-TON Yukon II Service Manual

STARTER CLUTCH AND STARTER MOTOR
2
A
B

CHECKING THE STARTER WHEEL GEAR

1. Check:
• gear comp starting clutch
• gear starter reduction
1
Burrs/chips/roughness/wear → Replace
2. Check:
starter clutch operation
•
a. Install the starter wheel gear
gear
b. When turning the starter wheel gear clock-
wise
A
gear should engage, otherwise the starter clutch
is faulty and must be replaced.
c. When turning the starter wheel gear coun-
terclockwise
the starter clutch is faulty and must be replaced.
4 - 40
ENG
1
2
2 and hold the starter clutch.
, the starter clutch and the starter wheel
, it should turn freely. otherwise
B
1 onto the idle