Chassis; Checking The Front Brake Shoes; Adjusting The Front Brake - E-TON Yukon II Service Manual

CHECKING THE FRONT BRAKE SHOES/

1
a
1
2
b
c

ADJUSTING THE FRONT BRAKE

CHASSIS

CHECKING THE FRONT BRAKE SHOES
1. Operate the brake:
2. Check:
•
2
3. Adjust:
ADJUSTING THE FRONT BRAKE
TIP
Before adjusting the front brake, the front
brake linings should be checked.
N O T I C E
Proper lever free play is essential to avoid
excessive brake drag.
1. Measure:
• front brake lever free play
2. Adjust:
• front brake lever free play
a. Loosen the locknuts
b. Turn the adjusters
TIP
Make sure that the difference between clear-
ances
front brake lever is squeezed.
c. Tighten the locknuts.
3 - 19
wear indicator 1
Wear indicators reaches the wear limit line
→ Replace the brake shoes as a set.
Refer to "FRONT BRAKES" in chapter 6.
Adjust the front and rear brake lever free play
after replace the brake shoes.
Out of specification → Adjust.
Front brake lever free play
4 ~ 7 mm (0.16 ~ 0.28 in)
1 .
2
specified front brake lever free play is obtained.
c
b and is less than 4 mm when the
CHK
ADJ
2
a
in or out until the