Wireless Features - NEC UNIVERGE NEAX 2000 IPS General Description Manual

CHAPTER 5 FEATURE DESCRIPTION

Wireless Features

Analog PBX Interface
This feature allows a secretary to interrupt the boss in a private way. By pressing a feature key or
dialing an Access Code, the secretary
Announcement - PS No Answer /
Announcement - PS Out of Zone
This feature allows calls to a PS which cannot be paged in a predetermined period of time to be
routed to the announcement notifying the calling party that the PS cannot answer.
Announcements can be divided between Announcement-PS No Answer and Announcement-PS
Out of Zone depending on the PS condition.
Call Forwarding-Not Available
When a PS is power off or out of zone, a call directed to the PS is forwarded to a VMS, and a
voice mail message can be recorded to the VMS and checked from the PS. Also the VMS can
page the PS automatically after the voice mail message is recorded.
Call Forwarding-PS Out of Zone
This feature allows calls directed to a PS which is power off or out of zone to be routed to an
another station, an Attendant, an outside number or voice mail equipment. The call forwarding
destination can be set/cancelled from the PS station or MAT/CAT.
CCIS Interface
This feature allows the WCS to be integrated with NEC PBXs with CCIS interface.
Calling Name Display - PS
Without answering incoming calls or hold calls terminates to the PS, the calling party's name
can be confirmed by the indications on the LCD.
Calling Number Display - PS
This feature provides a display on the LCD of a PS receiving a call, indicating the station
number.
DTMF Signal Sender
This feature allows a PS user to send the DTMF signal (tone) to the called party (terminal, voice
mail system, etc.) while engaged in communication.
Handover
When the signal transmission quality becomes inferior, a PS re-originates a call automatically
and seizes another radio channel, making the WCS handover the call to another zone transceiver
to maintain the speech quality.
Individual PS Calling
This feature allows the calling party to page the individual PS.
Last Number Redial-PS
This feature enables a PS to store the numbers dialed in the previous five calls including the last
number dialed. The stack dial numbers are sequentially displayed on the LCD, allowing the
station user to make an outgoing call by selecting the desired dialed number from the display.
UNIVERGE NEAX 2000 IPS General Description Page 144
Issue 5