NEC UNIVERGE NEAX 2000 IPS General Description Manual page 115

Caller ID Station
This feature enables a user to connect analog telephones with Caller ID display function, and
provides the calling party's number and name on the display without answering incoming calls.
Camp-on
This feature provides selected stations or outside calls with Camp-On capability to a busy
internal station. Two Camp-On methods are provided. The call waiting method allows a station
or an outside party to camp itself on to a busy station. The transfer method allows a transferred
outside call to be camped-on to a busy station.
Centrex Compatibility
A combination of features allows full integration of the UNIVERGE
Centrex service.
Check In / Check Out
When this feature is activated, the following operations occur:
• Check In
• Room Cutoff is cleared.
• Check Out
• Room Status printout is supplied.
• Do Not Disturb is reset.
• Room Cutoff is set.
• Message Waiting is reset.
• Automatic Wake Up is cleared.
CID Call Back
When an Incoming Call is terminated from a Station and Trunk with Caller ID (Calling Number
Information), and the Called Station does not answer, the Calling Number is registered to the
system memory and MW Lamp is lit. After the Calling Number is registered, by operating from
a Station, Confirmation, Delete, or Call Back is available. When the Called Station answers, the
Calling Number is also registered to the Last Number Redial Memory. The Station can search
and call back to that number by the operation of the Last Number Redial/Stack Dial feature.
CID Call Routing
This feature allows designating a call terminating system based on the Calling Party Number
received from the network.
Class of Service
This feature permits all stations to be assigned a Class of Service in accordance with the degree
of system use desired. The Class of Service is used to assign restrictions for trunk access and
feature access.
Code Restriction
This feature allows the UNIVERGE
according to specific area and/or Central Office codes. This restriction is controlled on the basis
of a three-digit area code or six-digit area and office code numbering plan.
Conference (Three/Four Party)
This feature provides a station user the ability to add-on another party (trunk or station) to a call
already in progress. Single Line Telephone users can add up to one additional party and
Multiline Terminal users can add up to two additional parties.
UNIVERGE NEAX 2000 IPS General Description
Issue 5
2000 IPS to be programmed to restrict outgoing calls
NEAX
CHAPTER 5 FEATURE DESCRIPTION
2000 IPS with
NEAX
Page 111