NEC UNIVERGE NEAX 2000 IPS General Description Manual page 60

CHAPTER 3 TERMINALS
Line Conditions of the Analog Terminals
Terminal
Type
DTR-1
DTR-1HM
DTH-1-1
*Cable length is based on the diameter of the cable and the terminal impedance.
Specification for Analog Terminals
Item
Size
Color
Dial Pad
Type of Dial
Function Buttons
Message Waiting Lamp
Operating Voltage
Speed Dials
Hookflash Timer
Redial Key
Ring Vol. Control
Ring Tone Pitch Control
Handset Receiver &
Speaker Volume
Handset
Handset Cord
Directory Card
Data Jack
Wall-Mount Unit
Electrostatic Discharge
Approvals
UNIVERGE NEAX 2000 IPS General Description
Issue 5
Card Type
PN-8LCAK
(max. 600 ohms loop resistance)
PN-AUCA
(max. 2500 ohms loop resistance)
PN-4LLCB
(max. 2500 ohms loop resistance)
PN-8LCAD
(max. 600 ohms loop resistance)
224mm x 165mm +/5mm (Length x Width)
Black or White
12-Key Dial Pad: 4 Rows and 3 Columns;
Metropolitan Dial Pad with Alphabet, * and # buttons;
Button 5 has a Raised Dot
DTMF and Dial Pulse
Hook flash, Redial Key on DTR-1-1; Hookflash,
Program, Redial, Monitor, and Hold Keys on DTR-
1HM-1
Neon Lamp with Window Design -Glow Through Filter
Raised from Surface with MW and Incoming Ring
Indication
Activation Voltage 88V to 108V, Deactivation
Voltage 53V or Less
(DTR-1HM Only) 8 Buttons, Maximum 21 Digits
630+/10ms (Fixed)
Maximum of 31 digits
3 Levels (Soft, Medium, Loud) Programmable
3 Levels (Slow, Medium, Fast, Off) Programmable
6 Levels (Volume Key)
Hearing Aid Compatible, Dynamic Type Element
12 feet
Large Convenient Directory Card
Dedicated Jack; Used for Connection to Modem,
Speakerphone, etc., located on back of telephone
Built-in
Can Withstand +/- 20kv Discharge
c-UL (Ul 60950 3rd Edition) FCC part 15, 68,
IC (Industry Canada)
Cable Length*
(Cable 0.5/24 AWG)
Approximately:
1.43km (.88 miles)
Approximately
12.29km (7.63 miles)
Approximately
12.29km (7.63 miles)
Approximately:
1.43km (.88 miles)
Description
Page 56