NEC UNIVERGE NEAX 2000 IPS General Description Manual page 130

CHAPTER 5 FEATURE DESCRIPTION
Called Station Status Display
This feature provides a display on the status of a called station on the LCD of the calling
Multiline Terminal.
Calling Name and Number Display
This feature provides a display on the LCD of the Multiline Terminal receiving a call,
indicating the station number or trunk number of the incoming call.
Dynamic Dial Pad
This feature allows to make an outgoing call at first hand by pressing a ten key of Multiline
Terminal, without pressing a Speaker key or going off-hook.
Group Fearture Key
This feature provides the multiple line keys of Multiline Terminal with DSS/BLF function.
A station user can monitor the status of group member stations such as idle, busy, hold and
ringing by lamp indication of the multiple line keys. If a line is idle, a station user can make
a call to the member station by pressing the associated line key (instead of pressing DSS
key). If a line is ringing or is on hold, a station user can pick up the incoming call or the call
on hold by using My Line, and the ringing or held line is made idle.
Handsfree Unit
The built-in Handsfree Unit enables full Handsfree operation for both internal and external
calls (No optional Handsfree Unit is required).
I-Hold / I-Use Indication
Multiline Terminals provide indication of which line keys have been placed on Hold, or are
in use by that Multiline Terminal. The LED associated with the line key will give the
appropriate indication.
Microphone Control
All Multiline Terminals are equipped with a Microphone Control button with an associated
LED.
Multiple Line Operation
This feature allows for the appearance of multiple lines on the Flexible Line Keys and
feature keys of all Multiline Terminals.
Mute Key
This feature allows the distant extension user, of a station user that presses a mute key during
conversation, not to hear the station user's voice though the station user can hear the distant
extension user's voice. By pressing the mute key again, the mute status returns to original
conversation.
My Line Number Display
This feature enables a Multiline Terminal to display My Line (Primary Extension) number
on the LCD during the Multiline Terminal in idle state.
UNIVERGE NEAX 2000 IPS General Description
Issue 5
Page 126