NEC UNIVERGE NEAX 2000 IPS General Description Manual page 119

Busy Out Status Console
This feature allows a DSS/BLF Console unit associated with a Multiline Terminal to be
used as a Busy Out Status Console. This feature is activated by use of a Function Mode
key on a DSS/BLF Console. Busy Out Status for each station is indicated by a red LED
associated with each button.
Do Not Disturb Console
This feature allows a DSS/BLF Console unit associated with a Multiline Terminal to be
used as a Do Not Disturb (DND) Console. This feature is activated by the use of a
Function Mode key on a DSS/BLF Console. DND set status for each station is indicated by
a green LED associated with each button. In addition, the Multiline Terminal user can
set/cancel the DND status of other stations using the DND Console.
Message Waiting Console
This feature allows a DSS/BLF Console unit associated with a Multiline Terminal to be
used as a Message Waiting (MW) Console. This feature is activated by the use of a
Function Mode key on a DSS/BLF Console. The Message Waiting status for each station
is indicated by a green LED associated with each button. In addition, the Multiline
Terminal user can set/reset MW status using the MW Console.
Room Cutoff Console
This feature allows a DSS/BLF Console unit associated with a Multiline Terminal to be
used as a Room Cutoff Console. This feature is activated by the use of a Function Mode
key on a DSS/BLF Console. The Room Cutoff status for each station is indicated by a
green LED associated with each button. In addition, the Multiline Terminal user can
set/cancel Room Cutoff to another station using the Room Cutoff Console.
Wake Up No Answer Console
This feature allows an EDW-48-2A unit associated with a Multiline Terminal to be used
as a Wake Up No Answer (WU) Console. This feature is activated by a function mode
key on a DSS/BLF Console. The No Answer status for each station is indicated by a
flashing green LED associated with each button.
Distinctive Ringing
This feature provides Distinctive Ringing patterns to the station so that the station user can
distinguish between internal and external incoming calls. This feature also enables the LED
associated with the line key of the Multiline Terminal to flash in two colors according to the kind
of incoming call.
Do Not Disturb
This feature restricts incoming calls to a station and can be set by an individual station or from
the Attendant Console. Placing a station in Do Not Disturb (DND) does not prevent a station
from originating a voice or data call or from receiving a data call. This feature also allows a
station to ensure privacy from telephone interruptions while on an outgoing call. Additionally,
the Attendant Console can place a group of stations in the Do Not Disturb condition.
Do Not Disturb – Group
This feature allows the system to schedule to set/cancel Do Not Disturb for a group of
stations at appointed time. The system has up to four patterns of timetable, and each
timetable has time to set/cancel Do Not Disturb in a day (the time is programmable by the
system). The timetable can be assigned for day of the week. The different timetable can also
be assigned for specific dates of the year.
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 5 FEATURE DESCRIPTION
Page 115