NEC UNIVERGE NEAX 2000 IPS General Description Manual page 113

Multiple Call Forwarding - Busy Line
This feature permits a call to a busy station to be forwarded multiple times to a designated
idle station.
Multiple Call Forwarding - No Answer
This feature permits a call to an unanswered station, the ability to be forwarded multiple
times to a designated station that does not have Call Forwarding - No Answer set or to the
Attendant Console.
Split Call Forwarding - All Calls
This feature allows all internal and external calls to a busy extension to be rerouted to
different destinations individually, regardless of the busy or idle status of the extension.
According to the type of incoming call (Station, C. O. Line, Tie Line, or a call terminated
from internal office or via CCIS); Call Forwarding or Split Call Forwarding can be selected.
Split Call Forwarding - Busy Line
This feature allows internal and external calls to a busy extension to be rerouted to separate
destinations. Destinations may be an internal station, Attendant Console, or voice mail. And
according to the type of a caller (Station/C.O. Line/Tie Line) or a call terminated from
internal office or via CCIS, Call Forwarding or Split Call Forwarding can be selected.
Split Call Forwarding - No Answer
This feature allows internal and external calls to a busy extension to be rerouted to separate
destinations. Destinations may be an internal station, Attendant Console, or voice mail. And
according to the type of a caller (Station/C.O. Line/Tie Line) or a call terminated from
internal office or via CCIS, Call Forwarding or Split Call Forwarding can be selected.
Call Forwarding – Logout (DtermIP)
This feature allows a call terminated to an IP Station in Logout Status to be forwarded to a
designated Station, Outside Number, Attendant Console or Digital Announcement Trunk
(DAT). This feature is also
applicable to the IP Stations that the LAN Cable is pulled out of or the power is off.
Call Forwarding - Override
This feature allows the call forward destination station to call the station which set call
forward. The call forward setting will be ignored.
Group Diversion
This feature allows all calls terminated to an extension that are not answered within a
predetermined time to be forwarded to a pre-designated station.
Call Park
This feature enables a station user or attendant to place a call into pre-designated Call Park
locations. The station user or attendant is then free to process other calls. This feature is available
system wide and for individual tenants.
Call Park - System
When a call is parked by Call Park-System, the call can be retrieved from Call Park by any
station in the system.
Call Park - Tenant
When a call is parked by Call Park - Tenant, the call can be retrieved from Call Park-Tenant
by any station within the tenant from which the call was originally parked.
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 5 FEATURE DESCRIPTION
Page 109