NEC UNIVERGE NEAX 2000 IPS General Description Manual page 176

CHAPTER 7 SPECIFICATIONS
Item
Physical Module Chassis
Physical MC Port for Line/Trunk
Built in FP (on MP)
FP card (PN-CP33)
IP PAD (No. of Channel)
Analog Single Line Telephone
(Lines)
Dterm (Lines)
DSS/BLF Console
DtermIP/ INASET / SP30 (Peer to Peer Connection)
Dterm PS
Zone Transceiver (ZT)
ISDN Terminal (2ILCC)
Central Office Trunk (Lines)
Tie Line Trunk (Lines)
CCIS Trunk (Peer to Peer Connection)
DTI/CCIS Digital Link Note 3
ISDN
IP Trunk (IPT card or H.323 card)
PFT Connections
3-Party Conference
8-Party Conference Group
32-Party Conference Group
DTMF Sender
DTMF Receiver
SN716 Desk Console
Attendant Terminal (Dterm ATT Position)
Note 1: "MC" in this table means "Physical Module Chassis."
Note 2: Number of IP PAD card is maximum 2 per FP.
Note 3: The total number of trunk line and DTI channel shall be 256 or less. (Each trunk line and DTI
channel are required to assign the "Trunk Number" by system data programming and maximum
number of system parameter for "Trunk Number" is 256.)
UNIVERGE NEAX 2000 IPS General Description
Issue 5
DML
IPS System Capacity
1 MC 2 MC 3 MC 4 MC 5 MC 6 MC 7 MC 8 MC
1
48
32
Note 2
Standard 48
Long 12
Standard 48
Long 8
956
16
P-P Connection
12
P-MP Connection
24
Loop Start
48
DID w/4DIT 24
2W or 4W E&M 24
Type 1 w/PW122 4
1.5M
1.5 (PRT)
4BRT (card) 5
1
4PFTA 4
System Capacity Note 1
2 3 4
104 160 216
1
0 1
64 128
104 160 216
24 36 48
104 160 216
16 24 32
8 16
892 828 764
512
32 48 64
26
52
104 160 216
52 80 108
52 80 108
8 12 16
Max. 127
DTI: 10, CCIS: 8
8 Main, 32 Total
10 15 20
2 3 4
8 12 16
Max. 16 conference groups per system
Max. 8 conference group per system
Max. 8 conference group per system
Max. 32 circuits per system
16
8
Max. 8 sets per system
5 6 7 8
272 328 384 440
2 3
192 256
272 328 384 440
60 72 84 96
272 328 384 440
40 48 56 64
24 32
700 636 572 508
80 96 112 128
32
64
256
136 164 192 220
136 164 192 220
20 24 28 32
24
5 6 7 8
20 24 28 32
32
Page 172