NEC UNIVERGE NEAX 2000 IPS General Description Manual page 116

CHAPTER 5 FEATURE DESCRIPTION
Conference (Eight Party)
This feature permits a station user or Attendant (conference leader) to establish a Conference
among as many as eight parties (including the Conference leader).
Conference (32 Party)
This feature permits a Station User (PS, Multiline Terminal, Single Line Telephone), Attendant,
or a Trunk Party to establish a Conference among as many as 32 Parties (including the
Conference Leader).
Conference.
Group Call
This feature enables a Station User (PS, Multi-line Terminal, Single Line Telephone) within
the system or a Trunk Party to establish a Conference among as many as 32 Parties. It also
enables a Station User to page a maximum of 31 Parties simultaneously, excluding the
Conference Leader. Three Group Call methods are available: Group Call - Automatic
Conference, Group Call - Broadcasting, and Group Call - 2-Way Calling.
Group Call - Automatic Conference
This feature enables a Station User to establish a Conference among as many as 32 Parties.
From a station or Attendant, a maximum of 31 Stations/Trunks can be paged simultaneously
except the Conference Leader. The Paged Stations/Trunks are assigned to the simultaneous
Paging Groups as participants by the System Data beforehand.
Group Call - Broadcasting
This feature enables a Station User to page a maximum of 31 Parties simultaneously except
the Group Call Leader. After Paged Parties answer, the leader can speak to the Paged
Parties (the Paged Parties only hear the leader's voice). The Paged Stations/Trunks are
assigned to the simultaneous Paging Groups as participants by the System Data beforehand.
Group Call - 2-Way Calling
This feature enables a Station User to page a maximum of 31 Parties simultaneously except
the Group Call Leader. After one of the Paged Parties answers, paging becomes 2-Way
Calling between the leader and the first answered party and automatically stops paging other
parties. The Paged Stations/Trunks are assigned to the simultaneous Paging Groups as
participants by the System Data beforehand.
Meet-Me Conference
This feature enables Station Users (PS, Multi-line Terminal, Single Line Telephone) within
the system, Attendants, or Trunk Parties to join a Conference as many as 32 Parties by
dialing a specific Access Code. The Conference participants are automatically connected to
the Conference Trunk an alert tone signals new arrivals. Conference participants may call in
at preset time or may be directed to do so by a Conference coordinator once all the
participants have joined the conference leader can lock out the conference..
Consecutive Speed Dialing
For Speed Dialing, all digits are registered as a Speed Dialing Code. In the case of Consecutive
Speed Dialing, the common portion of the number is registered as a speed calling code, and the
remaining digits of each number are dialed by each individual calling station or by using a
Station Speed Dial key on a Multiline Terminal.
Consultation Hold
This feature permits a station user to hold any incoming or outgoing CO call, tie line call, or any
intra-office call while originating a call to another station user within the system.
UNIVERGE NEAX 2000 IPS General Description
Issue 5
Two Conference methods are available: Group Call and Meet-Me
Page 112