Konica Minolta bizhub 200 Service Manual page 397

6. Utility/Counter Mode
(2) Password Communication
<Communication Password>
• To allow a fax to be received only when there is a match in the password that has previ-
Functions
ously been registered on the transmitter and receiver ends.
Use • When using password reception
• The default setting is "00".
Setting/
Procedure
F. Print Lists
(1) Setting List
Functions
• To print information concerning the initial settings of the machine.
Use
1. Touch the [Print Lists].
Setting/
2. Touch the [Setting List].
Procedure
3. The setting list is printed.
G. Report Settings
(1) TX Report
Functions • To set the mode of output of the report used for confirming results of transmission.
• When changing the mode of output of the report used for confirming results of trans-
Use mission
• Setting is made individually for a single destination and two or more destinations.
<Single Dest>
Setting/
Procedure
<Broadcasting>
(2) Activity Report
• To select whether or not to print the activity report for every 50 transactions automati-
Functions
cally.
Use • When printing the activity report for every 50 transactions automatically.
• The default setting is "ON".
Setting/
Procedure
H. Document Management
(1) TX Document
<TX Forwarding>
Functions • To set to forward received text to a destination that has been set by the administrator.
Use • When forwarding received text to a destination that has been set by the administrator
1. Touch the [Document Management].
2. Touch the [TX Document].
Setting/ 3. Touch the [TX Forwarding].
Procedure 4. Specify the destination to which the received fax is to be forwarded and touch [Enter].
[One-Touch]: To specify the destination by the one-touch dial
[Search]: To search through one-touch dials
22
"00" (Disabled) 01 to 99 (Enabled)
ON "If TX Fails"
ON "If TX Fails"
"ON" OFF
Field Service Ver. 2.5 Jul. 2006
OFF
OFF