10. Tech. Rep. Mode
<Auto-RX Check>
• To set whether or not to use Auto-RX Check and the time interval for the POP3 server
Functions
used for CS Remote Care.
• To select not to use Auto-RX Check.
Use
• To change the time interval for Auto-RX Check.
• The default setting is "OFF"
Setting/
Procedure
<Connection Timeout>
Functions
• To set the timeout period for connection during reception.
Use
• To change the timeout period for connection during reception.
• The default setting is "60 sec"
Setting/
Procedure
<APOP Authentication>
Functions
• To set whether or not to enable APOP authentication during reception.
Use
• To enable APOP authentication during reception.
• The default setting is "OFF"
Setting/
Procedure
(3) TX Settings
<SMTP Server Address>
Functions
• To set the SMTP server address for transmission used for CS Remote Care.
• To set the address of the SMTP Server.
Use
• The SMTP server address can be set as an IP address or domain name.
<IP Address>
• IP address Version 4 format
Setting/
[0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
Procedure
<FQDN>
• Enter the domain name.
<SMTP Port Number>
Functions
• To set the SMTP port number for transmission used for CS Remote Care.
Use
• To set the port number of the SMTP Server.
• The default setting is "25"
Setting/
Procedure
<Connection Timeout>
Functions
• To set the timeout period for transmission.
Use
• To change the timeout period for connection during transmission.
• The default setting is "60 sec"
Setting/
Procedure
194
"OFF" (1 to 120)
"60 sec" (30 to 300)
ON
"OFF"
"25" (1 to 65535)
"60 sec" (30 to 300)
Field Service Ver. 2.5 Jul. 2006