Konica Minolta bizhub 200 Service Manual page 106

Field Service Ver. 2.5 Jul. 2006
CD Deviation
4030D597AA
4030D598AA
14. Remove the CCD Unit cover.
15. Apply lock paint to adjusting screws A, B, C, and D.
16. Reinstall the CCD Unit cover.
17. Reinstall the Original Glass, Front Holding Bracket and IR Upper Left Cover.
18. Reinstall all covers that have been removed.
Adjustment Procedure Using Adjustment Plate E
• If deviation in the CD direction is as shown on the left
1. Using a flat-blade screwdriver, turn adjustment plate E counterclock-
wise.
Adjustment
plate
Flat-blade
screwdriver
2. Tighten screws C and D.
• If deviation in the CD direction is as shown on the left
1. Using a flat-blade screwdriver, turn adjustment plate E clockwise.
2. Tighten screws C and D.
6. Other
Adjustment
plate
Flat-blade
screwdriver
67