Konica Minolta bizhub 200 Service Manual page 178

Field Service Ver. 2.5 Jul. 2006
(2) Network Setting 2
2
<IP Relay Settings>
• To specify a relay machine from multiple machines (of this model) connected to the
2
LAN and send a fax through a telephone line.
Functions
* Set [Gateway TX] to [Restrict] in [Scanner Settings] selecting [Admin. Management] -
[Admin. 2] - [Network Settings] - [Network Setting 1].
• When sending a fax through intranet.
Use
• When setting a IP relay machine.
<IP Relay Station Registration>
1. Touch the [IP Relay Settings].
2. Touch the [IP Relay Station Registration].
3. Select a number where a relay station is to be registered.
4. Press [IP Relay Address] and enter the IP address of the relay machine.
If a host name needs to be entered, press [Host Name] and enter the name.
5. Press [Port] and enter a new number when the port number needs to be changed.
6. Touch the [Enter].
Setting/
7. Press [Domain Name] and enter the domain name of the IP relay station.
Procedure
8. Touch the [Enter].
<Secure Print Waiting>
1. Touch the [Secure Print Waiting].
2. Select the number of the relay station to be used, and press [Enter].
<Result reception port>
1. Touch the [Relay Result Port].
2. Enter a port number where relay results are received, and press [Enter].
<SIP-FAX Settings>
2
See P.24 of the FK-503 service manual.
<Prefix/Suffix Settings>
• ON/OFF Setting
• To set whether to add Prefix or Suffix to the address when calling or entering an
Functions
address.
Use • To add Prefix or Suffix to the address.
• The default setting is "OFF".
Setting/
Procedure
• Key Name
Functions • To set the Key Name for Prefix/Suffix Settings.
Use • To enter the Key Name for Prefix/Suffix Settings.
1. Touch the [Key Name].
Setting/
2. Enter the Key Name (consisting of up to eight en-size characters) from the 10-Key Pad
Procedure
or the keyboard on the screen and then touch [Enter].
• Fixed File Format
Functions • To set whether or not to fix the file format.
Use • To select not to fix the file format.
• The default setting is "ON".
Setting/
Procedure
ON "OFF"
"ON" OFF
8. Utility/Counter Mode
139