Konica Minolta bizhub 200 Service Manual page 198

Field Service Ver. 2.5 Jul. 2006
F. Fuser Temp.
• To adjust the temperature of the Fusing Roller for each paper type in order to change
Functions
the fusing performance according to the operating environment and paper type.
• To adjust the fusing temperature for each type of paper.
Use • When a fusing failure occurs.
• When the paper type is changed.
• The default setting is "1".
Adjustment
• Setting Range: 1 to 4 (Normal)
Range
1. Call the Tech. Rep. Mode to the screen.
2. Touch the keys in this order: [Tech. Rep. Choice] → [Printer] → [Fuser Temp.].
3. Select the paper, for which the adjustment is made.
Adjustment
4. Press the Clear key and change the setting value using the 10-Key Pad
Procedure
5. Touch [END] to validate the new setting value.
• For more details, see the temperature table for fusing temperature adjustment.
P.159
(1) Table of Temperatures for Adjusting the Fusing Temperature
2
<Standard paper>
Touch Panel Setting
bizhub 350
1
bizhub 250
bizhub 200
bizhub 350
2
bizhub 250
bizhub 200
bizhub 350
3
bizhub 250
bizhub 200
1 to 3 (Thin Paper)
Marketing
Paper width
region
U.S.
221 or more
Europe
U.S.
220 mm or
less
Europe
U.S.
221 or more
Europe
U.S.
220 mm or
less
Europe
U.S.
221 or more
Europe
U.S.
220 mm or
less
Europe
U.S.
221 or more
Europe
U.S.
220 mm or
less
Europe
U.S.
221 or more
Europe
U.S.
220 mm or
less
Europe
U.S.
221 or more
Europe
U.S.
220 mm or
less
Europe
10. Tech. Rep. Mode
1 to 3 (Thick Paper)
Mode 1
Heater temperature (main/sub)
180 °C
200 °C
170 °C
180 °C
180 °C
160 °C
180 °C
190 °C
200 °C
180 °C
190 °C
190 °C
170 °C
190 °C
200 °C
190 °C
190 °C
170 °C
200 °C
180 °C
200 °C
1 to 3 (OHP)
Mode 3
190 °C
159