Settings In The Reports - Konica Minolta bizhub 200 Service Manual

Field Service Ver. 2.5 Jul. 2006
(3) <Encryption Setting>
2
• To encrypt data stored in HDD.
2
Functions
* This function is available when a security kit SC-504 is installed.
• To be used when setting encryption codes.
NOTE
Use
• HDD needs to be formatted after this setting. Before making this setting, be sure
to take out necessary data from HDD.
1. Touch [HDD Management].
2. Touch [Encryption Setting].
3. Touch [Input].
4. Type in the encryption key. Touch [New Encryption Key], type in the encryption key,
and then touch [Enter].
Setting/
5. Touch [Re-enter Encryption Key], type in the encryption key again, and then touch
Procedure
[Enter].
6. Select [Enter] on the confirmation screen of the encryption codes and press [Enter].
7. Turn OFF the main power, wait for 10 seconds or more and turn ON the power.
8. Format the HDD.
9. Turn OFF the main power, wait for 10 seconds or more and turn ON the power.
(4) Format
Functions • To format HDD.
Use • To initialize the hard disk.
1. Make sure 2 minutes passed since the main power has been turned ON.
2. Press [HDD Management].
Setting/
3. Press [Format].
Procedure
4. Select [Yes] and press [Enter].
5. Turn OFF the main power, wait for 10 seconds or more and turn ON the power.
8.6

Settings in the Reports

2
See P.25 of the FK-503 service manual.
8. Utility/Counter Mode
145