Konica Minolta bizhub 200 Service Manual page 238

Field Service Ver. 2.5 Jul. 2006
Error code
1
Socket is not connected
2039
(LAN cable on the server side is loose.)
Network is down
203E
(LAN cable on the copier side is loose.)
3000 POP3_AUTHORIZATION_ERR
3001 POP3_TRANSACTION_ERR
3002 POP3_CONNECT_ERR
3003 POP3_TIMEOUT_ERR
3004 POP3_FORMAT_ERR
3005 POP3_MEMORY_ERR
3006 POP3_JOBID_ERR
3007 POP3_NO_DATA_ERR
3008 POP3_DELETE_FAIL_ERR
3009 POP3_MAILBOX_FULL
Not ready (MIO)
(An attempt is made to send or receive mail when
4103
e-mail reception is not ready yet after power has
been turned ON.)
4104 SMTP channel not ready
4105 POP3 channel not ready
4106 Not ready in conditions other than above
Error
10. Tech. Rep. Mode
Solution
• Check the SMTP server and
POP3 server on the user side.
• Check the network connector
for connection to the copier on
the user side.
• Check the network environ-
ment on the user side.
• Check the POP3 server envi-
ronment on the user side.
• Check the POP3 server envi-
ronment on the user side.
• Check the POP3 server envi-
ronment on the user side.
• Check the POP3 server envi-
ronment on the user side.
• Check the POP3 server envi-
ronment on the user side.
• Check the POP3 server envi-
ronment on the user side.
• Check the POP3 server envi-
ronment on the user side.
• Check the POP3 server envi-
ronment on the user side.
• Check the POP3 server envi-
ronment on the user side.
• Check the POP3 server envi-
ronment on the user side.
• Wait for some while and then
retry.
• Wait for some while and then
retry.
• Wait for some while and then
retry.
• Wait for some while and then
retry.
199