Appendix A - Specifications - Fenix SM2000 Operation Manual

FENIX IMVICO
APPENDIX A – SPECIFICATIONS
Printing method
Dot density
Printing direction
Printing width
Character per line (default)
Character spacing (default)
Character structure
Character size (mm)
Character number
Print speed
Paper feed speed
Line spacing (default)
Paper roll
Thermal paper type
Interface (compatible)
Receive buffer
Power supply
Current consumption
(at 24V, head resistance 630.5 Ω Ω Ω Ω ,
and fixed two-division printing)
Life span (at 25ºC )
Activation pulse resistance
Abrasion resistance
Autocutter
Temperature
Overall dimensions (mm)
Weight (Kg)
Thermal line printing
203 dpi x 203 dpi (dpi = dots per inch.
1 inch=25.4mm)
8 dots x mm
Unidirectional with friction feed
72 mm (576 dots)
Font A: 42 Font B: 56
0.25 mm (2 dots)
Font A: 12 x 24 dots (1.5 x 3 mm).
Font B: 8 x 16 dots (1 x 2 mm).
Font A is the default.
Font A
Standard: 1.5 x 3
Double-width: 3 x 3
Double-height: 1.5 x 6
Double width/height: 3 x 6
Alphanumeric characters: 95
Extended Graphics:
High speed mode: up to 220 mm/s
(The printing speed could vary automatically depending on
the print head temperature as well as the command
processing and the data transmission speed).
Low power consumption mode: 100 mm/s
220 mm/s (continuous paper feed)
4.25 mm
Width: 80 +0/-1mm
Maximum outside diameter: 100 mm
TF50KS-E2C (Nippon Paper Industries)
PD160R-N (Oji Paper Co.)
HP220AB1 (Mitsubishi Paper Mills Limited
RS-232C / IEEE 1284 (Nibble mode) / USB
Up to 128 Kbytes (SM2000-S/P)
Up to 512 Kbytes (SM2000-U)
2 drives
+24V DC ± 10%
Maximum
Printing Ratio 100%
15.4 A
Printing Ratio 50%
8.05 A
Printing Ratio 25%
4.35 A
100 millions pulses or more.
100 Km or more.
500.000
Operating: 0 a 50ºC
Storage: -20 a 60ºC, except for paper.
128 x 130 x 180 (H x W x D)
0.800
SM2000 OPERATION MANUAL
Font B
Standard:
Double-width:
Double-height:
Double width/height: 2 x 4
128 per page
Average
Printing Ratio 100%
13.65 A
Printing Ratio 50%
7.15 A
Printing Ratio 25%
3.95 A
1 x 2
2 x 2
1 x 4
52/65