FENIX IMVICO
LINE OF IMPRESSION and LINE OF CUT
Due to the constructive physical elements of the mechanism of impression and cut of the paper, the
positioning of the line of drivers that they print and the one of the blade that cuts do not agree:
Sense of advance
of the paper
This distance must consider at the time of constructing ticket if m=49 is used.
GS f n
[Name]
Select font for Human Readable Interpretation (HRI) characters
[Format]
ASCII
Hex
Decimal
[Range]
n = 0, 1, 48, 49
[Description]
Selects a font for the HRI characters used when printing a bar code.
n selects the font as follows:
0, 48
1, 49
[Default]
n = 0
[Reference]
GS H, GS k
GS h n
[Name]
Select bar code height
[Format]
ASCII
Hex
Decimal
1 ≤ n ≤ 255
[Range]
[Description]
Selects the height of the bar code.
n specifies the number of dots in the vertical direction.
[Default]
n = 185 dots
GS k
[Reference]
GS
f
1D
66
29
102
n
Font
Font A (12 x 24)
Font B (8 x 16)
GS
h
1D
68
29
104
11 mm
13 mm
n
n
n
n
n
n
SM2000 OPERATION MANUAL
Position of the line
of manual cut
Position of the line of
automatic cut
Position of the line
of impression
45/65
Need help?
Do you have a question about the SM2000 and is the answer not in the manual?