Fenix SM2000 Operation Manual page 39

FENIX IMVICO
ESC M n
[Name] Select character font
[Format] ASCII
Hex
Decimal
[Range] n =0, 1, 48, 49
[Description] Selects character fonts.
n
0, 48
1, 49
[Notes]
•
The ESC ! command can also select the character fonts. However, the setting of the last
received command is effective.
•
This command is enabled only when no data exists in the print buffer.
n = 0
[Default]
[Reference] ESC !
ESC a n
[Name] Select justification
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Range]
[Description] Aligns all the data in one line to the specified position
n selects the justification as follows:
n
0, 48
1, 49
2, 50
[Notes]
•
The command is enabled only when processed at the beginning of the line.
•
This command executes justification in the printing area.
[Reference] ESC !
[Example]
Left justification
ABC
ABCD
ABCDE
ESC M n
1B 4D n
27 77 n
Function
Character font A (12 x 24) selected.
Character font B (8 x 16) selected.
ESC a n
n
1B 61
27 97 n
Justification
Left justification
Centering
Right justification
Centering
ABC
ABCD
ABCDE
SM2000 OPERATION MANUAL
Right justification
ABC
ABCD
ABCDE
39/65