To Recall Copy Program - Konica Minolta bizhub 500 User Manual

Advanced Information
Note
To cancel the program registration, press [Reset] or [Mode Memory] on
the control panel before returning to the Basic Screen. The program reg-
istration will be cancelled from any screen displayed on the touch panel.
Otherwise, touch [Cancel] repeatedly until the Basic Screen is restored.

To recall copy program

Follow the procedure below to recall the stored copy program. The job set-
tings can be checked before recalling them.
0 The job settings cannot be changed from the Check Job Screen. If any
setting change is desired, recall the copy program then access the de-
sired setting screen, or press [Mode Check] to jump to the desired setting
from the Mode Check Screen. For details, see "Checking Feature Selec-
tions before Copying (Mode Check)" on page 7-6.
1
Position the original.
2
Press [Mode Memory] on the control panel.
The Recall Copy Program Screen will be displayed.
bizhub 500/420
7
7-13