3
3
Basic Copy Operations
3.1
General Copy Operation
This section describes how to make a basic copy.
How to make a basic copy
0 The following procedure is basic and not always applicable to the oper-
ation of selected copy conditions. When using a specific function, be
sure to follow the procedure described in each section.
1
Press [Copy] on the control panel to display the Basic Screen in Copy
mode.
–
The following type of Basic Screen will be displayed as factory de-
fault.
–
The left side area of the screen can also provide the current job list.
See page 14-20 for details.
3-2
Basic Copy Operations
bizhub 500/420