Konica Minolta bizhub 500 User Manual page 295

Application Functions
4
Touch [Erase], then touch [Center Erase] again.
The Center Erase Screen will be displayed.
5
Specify the erasure amount.
– Use [+] and [–], or control panel keypad to enter the desired erasure
amount. In order to specify a fraction, touch the bidirectional arrow
key to move the cursor, then use [+] and [–] to enter the desired val-
ue in 1/16 in. increments.
Do you want to change the currently entered value using control
?
panel keypad?
% Press [C] (Clear) on the control panel, then enter the correct value.
What if the value just entered is out of available range?
?
% The Input Error message will be displayed. Press [C] (Clear) on the
control panel, then reenter the correct value.
bizhub 500/420
5
5-79